- Get More Information Here:
- Yoga Instructor Online
Submitted by: AM Malik
Did you drop you iPhone 6 and shattered the screen?
Do you have technical skills for fixing your iPhone 6 screen with your own hands?
Presents to you a DIY video tutorial, for how to replace your iPhone 6 Screen.
Tutorial, for how to replace your iPhone 6 Screen.
Remove both screws from the bottom of your iPhone 6
Use the suction cup to pull the screen up, separating it from the body
Hold the screen so it doesnt rip the connectors
Then remove all 5 screws from the metal plate inside
Using the pick, carefully separate the connectors
Remove all six screws from the sides of the screen
Remove the three screws from the camera section
Remove the two screws form the home button
Disassemble the camera section (this require a lot of patience, for this section has many layers)
Carefully unplug the small connector next to the home button
Remove the home button and set aside.
Take off your metal plate and transfer it to your new screen
Screw all the six screws back on.
Reassemble the top parts again, making sure each plate fits back in its place.
Place the metal plate back and the three screws again.
Then screw the metal plate back on the home button
Now your screen is ready to use.
Plug the connectors back together one-by-one.
Place the metal plate back and screw the five screws back in its place.
To close the screen, push up and in. Then press down to fully close.
Finally, screw the remaining two screws back in.
If something went wrong or you decided to have a professional to look into it.
Tutorial, for how to replace your iPhone 6 Screen.
Remove both screws from the bottom of your iPhone 6
Use the suction cup to pull the screen up, separating it from the body
Hold the screen so it doesnt rip the connectors
Then remove all 5 screws from the metal plate inside
Using the pick, carefully separate the connectors
Remove all six screws from the sides of the screen
Remove the three screws from the camera section
Remove the two screws form the home button
Disassemble the camera section (this require a lot of patience, for this section has many layers)
Carefully unplug the small connector next to the home button
Remove the home button and set aside.
Take off your metal plate and transfer it to your new screen
Screw all the six screws back on.
Reassemble the top parts again, making sure each plate fits back in its place.
Place the metal plate back and the three screws again.
Then screw the metal plate back on the home button
Now your screen is ready to use.
Plug the connectors back together one-by-one.
Place the metal plate back and screw the five screws back in its place.
To close the screen, push up and in. Then press down to fully close.
Finally, screw the remaining two screws back in.
If something went wrong or you decided to have a professional to look into it.
Source page:
https://ifixscreens.com/how-to-fix-your-iphone-6-screen/
About the Author: IT expert having 8+ years of experience in the field.
ifixscreens.com/how-to-fix-your-iphone-6-screen/
Source:
isnare.com
Permanent Link:
isnare.com/?aid=1959983&ca=Break-up}
